Post-Construction Cleaning Punch List
Final Cleaning – Full Job Site Detail, plus Rough and Touch-Up phases.
| Area / Stage | Task | Included |
|---|---|---|
| Final Cleaning – All Areas | Remove all remaining dust and debris from construction | ✓ |
| Final Cleaning – All Areas | Vacuum and mop all floors (using HEPA filter when needed) | ✓ |
| Final Cleaning – All Areas | Wipe and sanitize all walls, trim, baseboards, doors, and frames | ✓ |
| Final Cleaning – All Areas | Clean light fixtures, ceiling fans, vents, and switches | ✓ |
| Final Cleaning – All Areas | Clean closets, shelving, and storage spaces inside and out | ✓ |
| Final Cleaning – All Areas | Clean interior windows, frames, and tracks | ✓ |
| Final Cleaning – All Areas | Clean windowsills, ledges, and blinds | ✓ |
| Final Cleaning – All Areas | Remove paint splatters, excess caulk, and grout residue | ✓ |
| Final Cleaning – All Areas | Polish all hardware, handles, and fixtures | ✓ |
| Final Cleaning – All Areas | Wipe all touchpoints (light switches, handles, knobs) | ✓ |
| Final Cleaning – All Areas | Final vacuum and dust removal from walls, floors, and surfaces | ✓ |
| Final Cleaning – All Areas | Bag and stage small trash and debris for onsite disposal | ✓ |
| Final Cleaning – All Areas | Ventilate property for a fresh, dust-free finish | ✓ |
| Rough Cleaning (Initial Phase) | Remove all debris: Dispose of construction waste, nails, screws, and packaging following local regulations. | ✓ |
| Rough Cleaning (Initial Phase) | Remove protective coverings: Peel off plastics, stickers, and protective films from windows, floors, and fixtures. | ✓ |
| Rough Cleaning (Initial Phase) | Dust from top to bottom: Wipe ceilings, vents, light fixtures, walls, and baseboards using a HEPA filter vacuum for fine dust. | ✓ |
| Rough Cleaning (Initial Phase) | Clean paint and residue: Remove any paint splatters, excess caulk, and grout from surfaces. | ✓ |
| Touch-Up Cleaning (Final Polish) | Remove last traces of settling dust from floors, walls, and surfaces. | ✓ |
| Touch-Up Cleaning (Final Polish) | Wipe mirrors, glass, and stainless steel for a streak-free finish. | ✓ |
| Touch-Up Cleaning (Final Polish) | Look for any leftover paint splatters, adhesives, or residue on floors and windows. | ✓ |
| Touch-Up Cleaning (Final Polish) | Polish all hardware (knobs, handles, and fixtures). | ✓ |
| Touch-Up Cleaning (Final Polish) | Empty trash bins, eliminate odors, and ventilate the room for turnover readiness. | ✓ |
Notes
- All services are performed using eco-friendly, non-toxic cleaning products and professional equipment.
- Power must be on for our team to safely complete the service.
- Please note, our team does not remove or haul trash or large debris outside the project area. Kindly ensure these items are cleared before our arrival.
- We’re happy to bag and stage debris in on-site bins as directed.